3M Fall Arrest Anchor Points

PBI stocks a range of 3M truss and purlin mounted fall arrest roof anchors – L4543, L4544, L4550, L4551, L4552.

Notes: 

 

Prior to use, all anchors should be inspected to ensure that they are in serviceable condition and have not been damaged or used to arrest a fall. If damage is visible or if there is any doubt about the anchors safe condition, immediately contact the PBI Height Safety.

 

Do not make any alterations or additions to the product without prior, written consent from PBI Height Safety.

 

All anchor devices should be used for personal use only and not for material use. Always check the anchor rating is suitable before use.

 

For the L4543, L4550, L4551 and L4552 purlin anchors to be installed and acceptable for use, the roof sheeting must be attached directly to the purlin. The anchor will not be acceptable if there is any item (i.e. top hat or insulation spacer) fitted between the roof sheeting and the purlin.

 

Provided the anchor passes inspection criteria and certification procedures, it may remain in service.

 

All roof anchors are required to be inspected by a competent person and recertified annually or more frequently as required or if used in highly corrosive environments. Further details can be obtained from AS/NZS 1891.4:2009 or by contacting PBI Height Safety.

 

All roof anchors can be installed during roof construction or retrofitted from above or below the roof sheeting any time after construction.

 

Suitable personal protective equipment (PPE) to be worn while using all roof anchors.

 

 

Purlin mounted anchor for steel roofs.

 

DBI-SALA’s permanent purlin mounted roof anchor is ideal for both residential and commercial applications. The anchor provides an economical solution for fall protection during the initial construction stage as well as future roof access and maintenance.

 

All anchor components are manufactured from 316 grade stainless steel and is able to sustain a load of up to 15 kN for single person use.

 

Key Features

 

  • Purlin mounted fall arrest anchor point.
  • Durable corrosion resistant construction.
  • Easy installation.
  • Large anchorage eye.
  • Load distributing design protect roof and user.
  • Complete kit with assembly/installation components.

 

Downloads

Datasheet – 3M L4543 Steel Purlin Fall Arrest Anchor Point

 

User Manual – 3M Purlin & Truss Mounted Abseil & Fall Arrest Roof Anchors

 

Gallery

3M_DBI_SALA_L4543_Roof_Anchor_194x194px

 

Truss mounted anchor for steel or tiled roofs.

 

DBI-SALA’s permanent truss mounted roof anchor is ideal for both residential and commercial applications. The anchor provides an economical solution for fall protection during the initial construction stage as well as future roof access and maintenance.

 

All anchor components are manufactured from 316 grade stainless steel and is able to sustain a load of up to 15kN for single person use.

 

Key Features

  • Truss mounted fall arrest/restraint anchor point.
  • Durable corrosion resistant construction.
  • Easy installation.
  • Large anchorage eye.
  • Load distributing design protects roof and user.
  • Complete kit with all assembly/installation components.

 

Downloads

Datasheet – 3M L4544 Truss Mounted Fall Arrest Anchor Point

 

User Manual – 3M Purlin & Truss Mounted Abseil & Fall Arrest Roof Anchors

 

Gallery

3M_DBI_SALA_L4544_Roof_Anchor_194x194px

 

Product Description

Permanent low-profile purlin mounted fall arrest (and abseil) anchor for flat pan, concealed fixed roofs or membrane applications.

The L4550 anchor provides an economical solution for fall protection during the initial construction stage as well as future roof access and maintenance. All of the L4550 anchor components are manufactured from 316 grade stainless steel and are able to sustain a load of up to 15kN for single person use

Key Features

• Purlin mounted – steel purlins.
• Low profile design.
• Ideal for both residential, commercial and industrial applications.
• Attachment type: bolt.
• Large anchorage eye – making attachment simple and quick.
• Abseil and fall arrest anchor point.
• Durable corrosion resistant construction.
• Easy installation.
• Complete kit with all assembly/installation components.

Product Specifications

 Weight:  0.95kg
 Dimensions:  65mm from pan
 Capacity:  1 user (136kg)
 Rating:  15kN
 Standards:  AS/NZS 1891.4:2009 & AS/NZS5532

Materials

• Eye bolt with 12mm threaded bar.
• M12 relived nut.
• Top plate.
• Bottom bar.
• Washer – nylon.
• Weather seal – NBR rubber pad.

Downloads

3M L4550 Roof Mount Anchor Datasheet

 

User Manual – 3M Purlin & Truss Mounted Abseil & Fall Arrest Roof Anchors

Gallery

3M L4550 Roof Mount Anchor Point on Membrane Roof   PBI 3M L4550 Roof Mount Anchor

Product Description

Permanent low-profile steel purlin mounted fall arrest (and abseil) anchor point for corrugated iron applications.

The L4551 anchor provides an economical solution for fall protection during the initial construction stage as well as future roof access and maintenance. All of the L4551 anchor components are manufactured from 316 grade stainless steel and are able to sustain a load of up to 15kN for single person use.

Key Features

• Purlin mounted – steel purlins.
• Low profile design.
• Ideal for both residential, commercial and industrial applications.
• Attachment type: bolt.
• Large anchorage eye – making attachment simple and quick.
• Abseil and fall arrest anchor point.
• Durable corrosion resistant construction.
• Easy installation.
• Complete kit with all assembly/installation components.

Product Specifications

 Weight:  0.95kg
 Dimensions:  65mm from pan
 Capacity:  1 user (136kg)
 Rating:  15kN
 Standards:  AS/NZS 1891.4:2009 & AS/NZS5532

Materials

• Eye bolt with 12mm threaded bar.
• M12 relived nut.
• Top plate.
• Bottom bar.
• Washer – nylon.
• Weather seal – NBR rubber pad.

Downloads

L4551 Roof Mount Anchor Datasheet

 

User Manual – 3M Purlin & Truss Mounted Abseil & Fall Arrest Roof Anchors

Gallery

PBI 3M L4551 Roof Mount Anchor

Product Description

Permanent low-profile steel purlin mounted fall arrest (and abseil) anchor point for trapezoidal applications.

Product Introduction: Single person fall arrest/restraint roof anchor for use on spandek roof sheeting attached to steel purlins, ideal for residential, commercial and industrial applications.

Key Features

• Purlin mounted.
• Low profile design.
• Ideal for both residential, commercial and industrial applications.
• Attachment type: bolt.
• Large anchorage eye – making attachment simple and quick.
• Abseil and fall arrest anchor point.
• Durable corrosion resistant construction.
• Easy installation.
• Complete kit with all assembly/installation components.

Product Specifications

 Weight:  0.95kg
 Dimensions:  65mm from pan
 Capacity:  1 user (136kg)
 Rating:  15kN
 Standards:  AS/NZS 1891.4:2009 & AS/NZS5532

Materials

• Eye bolt with 12mm threaded bar.
• M12 relived nut.
• Top plate.
• Bottom bar.
• Washer – nylon.
• Weather seal – NBR rubber pad.

Downloads

L4552 Roof Mount Anchor Datasheet

 

User Manual – 3M Purlin & Truss Mounted Abseil & Fall Arrest Roof Anchors

Gallery

   PBI 3M L4552 Roof Mount Anchor

Lets talk height safety!


 

 

 

 

 

 

 
Fall ArrestAbseil & Facade AccessLadder & Access Solutions