Ladder support bracket provides a secure attachment point for portable ladders preventing movement in any direction. Using a three piece profiled plate construction the slotted locking device allows on site adjustment providing both pitch and angle variation of the ladder support ensuring maximum stability and safety of the operator.
Roof Mounted: Positioned on edge of roof with rung support protruding the gutter edge.
Wall Mounted: Positioned on the wall set at the correct height to allow for sufficient ladder angle.
Parapet Mounted: Attached to the parapet with the rung support protruding sufficiently for ladder attachment.
Profiled stainless steel (with option for powder coating)
Length – 470mm (profiled section)
Width – 150mm (profiled section)
Wall mount – 2.30kg
Gutter/Parapet mount – 3.70kg
Timber fixing – 14g/type 17 tek screw x 4
Metal fixing – 8mm bulb tite rivet x 6 OR 14g into structure x 4
Concrete fixing – 8mm x 75 screw bolt x 3 OR wedge type anchor x 3
Steel structure – 8mm bolt set x 3
(Refer instruction manual)
Working Load Limit
Recommended for single person use with approved portable ladder – max user weight 120kg.
Support structure integrity, suitability and fixing method to be assessed and determined by a competent person prior to installation.
Katt Ladder Support Brackets are designed and manufactured generally in accordance with requirements of Australian Standards AS1657:2013 and
AS/NZS1891.4:2009 and relevant statutory OHS Codes of Practice/Guidelines.